EasyManuals Logo
Home>Cisco>IP Phone>8851NR

Cisco 8851NR User Manual

Cisco 8851NR
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #63 background image
Call Park
You can use your phone to park a call. You can then retrieve the call either from your phone or another phone,
such as a phone at a coworkers desk or in a conference room.
There are two ways you can park a call: call park and directed call park. You'll only have one type of call
park available on your phone.
A parked call is monitored by your network so you won't forget about it. If the call remains parked for too
long, you hear an alert. You can then answer, decline to answer, or ignore the call on your original phone.
You can also continue retrieving it from another phone.
If you don't answer the call within a certain length of time, it's routed to voicemail or another destination, as
set by your administrator.
A parked call occupies one line.
Place a Call on Hold with Call Park
You can park an active call that you answered on your phone and then use another phone in the call control
system to retrieve the call.
You can park only one call at the call park number.
Before you begin
Your call must be active.
Procedure
Step 1
Step 2
Press Park, and then hang up.
Your phone displays the number where the system parked
the call. The parked call is put on
hold, and you can press Resume to resume the call on your phone.
(Optional) Communicate the parked number to the person who needs to answer the call.
Retrieve a Call on Hold with Call Park
You can pick up a parked call from anywhere in your network.
Before you begin
You need the number that was used to park the call.
Procedure
Enter the number where the call is parked to retrieve the call.
CISCO 8800 SERIES
USER GUIDE
GoMomentum.com
888.538.3690
51

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 8851NR and is the answer not in the manual?

Cisco 8851NR Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Case materialAcrylonitrile butadiene styrene (ABS)
Product colorCharcoal
Wall mountableYes
Lines quantity5 lines
Phonebook capacity- entries
Number of VoIP accounts-
Volume controlDigital
Display diagonal5 \
Display resolution800 x 480 pixels
Voice codecsG.711Mu, G.711a, G.722, G.729A, iLBC
Number of microphones1
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsIEEE 802.3i/802.3u/802.3ab
Ethernet LAN (RJ-45) ports2
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Number of handles included- pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth257.34 mm
Width229.1 mm
Height40 mm
Weight1190 g

Related product manuals