Cisco ASR-920-24TZ-M Installation Guide

2-18
Cisco ASR-920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Aggregation Services Router Hardware Installation Guide
Chapter 2 Preparing for Installation
Site Planning
Locating for Proper Airflow
Ensure that the Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Router location has
enough airflow to keep the system operating within the environmental characteristics and the air
temperature is sufficient to compensate for the heat dissipated by the system. For more information, see
the “Air Flow Guidelines” section on page 10.
Installation Checklist
To assist you with your installation and to provide a record of what was done by whom and when,
photocopy the Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Router Installation
Checklist shown in Table 2-1. Use this to record the completion and verification of each procedure. After
the checklist is completed, place it in your Site Log along with the other records pertaining to your new
Cisco router.
Creating a Site Log
The Site Log provides a record of all the actions related to installing and maintaining the router. Keep it
in an accessible place near the chassis so that anyone who performs tasks has access to it.
Create the Site Log prior to the installation. (See “Site Log” for more information about the Site Log as
well as a sample Site Log that can be used to make copies.)
Table 2-1 Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Router Installation Checklist
Task
Verified
By Date
Date on which chassis received
Chassis and all accessories unpacked
Types and numbers of interfaces verified
Safety recommendations and guidelines reviewed
Installation Checklist copied
Site Log established and background information entered
Site power voltages verified
Site environmental specifications verified
Required passwords, IP addresses, device names, and so on, available
Required tools available
Network connection equipment available
Cable-management brackets installed (optional, but recommended)
AC power cables connected to AC sources and router
DC power cables connected to DC sources and router
Network interface cables and devices connected
System power turned on
System boot complete (STATUS LED is on)
Correct software configuration displayed after system banner appears

Cisco ASR-920-24TZ-M Specifications

General

Brand	Cisco
Model	ASR-920-24TZ-M
Category	Network Router
Language	English