Cisco RV134W Administration Guide

VPN
Site-to-Site IPsec VPN
Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router Administration Guide 111
6
STEP 2 Click Save.
STEP 3 Now the subnet 192.168.75.0/24 on Spoke1 can communicate with subnet
192.168.74.0/24 on Spoke2 via Hub.
Interface Select the Internet interface from drop-down list.
Remote Endpoint Select IP Address from the drop-down list and
enter the IP address.
Redundant Enable Leave unchecked.
NetBIOS Leave unchecked.
Local Traffic Section >
Local IP
Select Subnet from the drop-down list.
IP Address Enter local LAN subnet, for example 192.168.75.0
for Spoke1ToHub or 192.168.74.0 for
Spoke2ToHub.
Subnet Netmask Enter 255.255.255.0, then click Add to enter the
address in the IP/Subnet List.
Remote Traffic Section
>Remote IP
Select Subnet from the drop-down list.
IP Address Enter remote LAN subnet, for example 192.168.1.0
and 192.168.74.0 for Spoke1ToHub or 192.168.1.0
and 192.168.75.0 for Spoke2ToHub.
Subnet Netmask Enter 255.255.255.0, then click Add to enter the
address in the IP/Subnet List.

Cisco RV134W Specifications

General

Brand	Cisco
Model	RV134W
Category	Wireless Router
Language	English