ComAp InteliDrive Lite User Manual

ID–Lite-2.0 User guide, ©ComAp – January 2011 12
ID-Lite-2.0 User guide.pdf
Use Ethernet UTP cable with RJ45 connector for connection of the module into your ethernet network.
The module can be also connected directly to a PC using cross-wired UTP cable.
Hint:
The module requires configuration settings before usage. See IB-Lite-1.x Reference Guide.
IL-NT GPRS module
This plug-in module is GSM/GPRS modem which can work in two modes of operation based on
settings in setpoint COM1 Mode.
• Settings DIRECT = module works in GPRS network and enables connection via AirGate to
LiteEdit and WebSupervisor as well as sending SMS alarms.
• Settings MODEM = module works as standard GSM modem enabling CSD (Circuit Switch
Data) connection to controller with LiteEdit or other ComAp PC SW and sending alarm
SMSes.
Card inserts into expansion slot back on the controller. To insert the module, please follow the
instructions for IL-NT RS232 module, procedure is analogous.
Hint:
GPRS and CSD services has to be provided by your GSM/GPRS operator for successful operation.
Hint:
GPRS and CSD connection is not suitable for firmware update process, kindly used wired connection
instead like RS232, USB, RS485 or ethernet via IB-Lite!

ComAp InteliDrive Lite Specifications

General

Brand	ComAp
Model	InteliDrive Lite
Category	Controller
Language	English