ComAp InteliDrive Lite User Manual

ID–Lite-2.0 User guide, ©ComAp – January 2011 91
ID-Lite-2.0 User guide.pdf
IB-Lite (optional card)
Plug-in into ID-Lite controller EXTENSION MODULE port.
10/100 Mbit ethernet interface in RJ45 socket
IL-NT GPRS (optional card)
Plug-in into ID-Lite controller EXTENSION MODULE port.
GSM/GPRS modem
Quad Band 850/900/1800/1900 MHz
GPRS multi-slot class 10
CSD up to 14.4 kbps
TCP/IP communication over GPRS
Voltage supply 8-36V DC
IL-NT AOUT8 (optional card)
Plug-in into ID-Lite controller EXTENSION MODULE port.
Number of PWM outputs 8
PWM frequency 1200Hz
Maximum current 0.5 A
Maximum switching voltage 36 VDC
Output resistance 1Ω
Resolution 10 bits
IL-NT AIO (optional card)
Plug-in into ID-Lite controller EXTENSION MODULE port.
Number of Analog inputs: 4 (2400 Ohm, 20mA, 4V)
Number of Analog outputs: 1 (21mA, max.load 100 Ohm; 4,6V, max.10mA;
PWM 500Hz (5V / 10mA)
Resolution: 10 bits
Inputs:
Maximal resistance range: 2400 Ohm
Maximal voltage range: 4 V
Current range: 0-20 mA
Input impedance (current): 180 Ohm for mA measuring
Input impedance (voltage): >68 kOhm for V measuring
Resistance measurement tolerance: ± 2% +- 2 Ohm
Voltage measurement tolerance: ± 1% +- 1mV
Current measurement tolerance: ±2% +- 0,2mA
Outputs:
Voltage measurement tolerance: ± 1,5% +- 10mV
Current measurement tolerance: ± 2% +- 0,1mA
IL-NT BIO8 (optional card)
Plug-in into ID-Lite controller EXTENSION MODULE port.
Number of Binary Inputs/Outputs: 8 (configurable as Input or Output)
Max. one Binary output current: 0,4A

ComAp InteliDrive Lite Specifications

General

Brand	ComAp
Model	InteliDrive Lite
Category	Controller
Language	English