ComAp InteliPro User Manual

InteliPro, SW version 1.4, ©ComAp – April 2014
InteliPro 1.4 Comprehensive Guide - rev. 1
4-46
Technical data
Power supply
Power supply range
8-36VDC
Power supply drop-out
immunity
50ms (from min. 10V)
Power consumption
cca 200mA/8V; 50mA/36V
Peak power consumption
(LT)
cca 0,56A/8V; 1,8A/36V
Backup battery type
CR 1225
Estimated backup battery
lifetime
10 years
Operating conditions
Operating temperature
-20...70°C
Operating temperature (LT
version)
-40...70°C
Operating humidity
95% non-condensing (IEC/EN 60068-2-30)
Protection degree (front
panel)
IP65
Vibration
5-25Hz, +/- 1.6mm; 25-100Hz, a = 4g
Shocks
a
max
200m/s
2
Storage temperature
-30...80°C
Intended use according to
UL 508 standard
InteliPro is intended for use with switchgear and
associated equipment as per the category for Protective relays –
NRGU
Physical dimensions
Dimensions
185x125x60mm (WxHxD)
Weight
Mounting cutout size
175x115mm (WxH)
Standard conformity
Electromagnetic
compatibility
EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4
Low voltage directive
EN 61010-1:95 +A1:97
Binary inputs
Number of binary inputs
9
Galvanic insulation
Not insulated
Common pole
Positive, V
s
= 8-36VDC
Closed contact voltage
<2V
Open contact voltage
4V - V
s

ComAp InteliPro Specifications

General

Brand	ComAp
Model	InteliPro
Category	Relays
Language	English