ComAp InteliPro User Manual

InteliPro, SW version 1.4, ©ComAp – April 2014
InteliPro 1.4 Comprehensive Guide - rev. 1
4-49
Max. measured current
90 mA
Max. allowed current
120 mA
Current accuracy
2% of nominal current
Input 2 (CT k2, l2):
Current range
5 A
Max. measured current
9 A
Max. allowed current
12A continuous, 50A/1s
Current accuracy
2% from the range
CT input burden
<0.5VA
Recommended CAN cables
 Belden 3082A DeviceBus for Allen-Bradley DeviceNet
 Belden 3083A DeviceBus for Allen-Bradley DeviceNet
 Belden 3084A DeviceBus for Allen-Bradley DeviceNet
 Belden 3085A DeviceBus for Allen-Bradley DeviceNet
 Belden 3086A DeviceBus for Honneywell SDS
 Belden 3087A DeviceBus for Honneywell SDS
 Lapp Cable Unitronic Bus DeviceNet Trunk Cable
 Lapp Cable Unitronic Bus DeviceNet Drop Cable
 Lapp Cable Unitronic Bus CAN
 Lapp Cable Unitronic-FD Bus P CAN UL/CSA

ComAp InteliPro Specifications

General

Brand	ComAp
Model	InteliPro
Category	Relays
Language	English