Vector Sensor Reference Manual xv
Organization
This manual contains the following chapters.
Chapter 1: Introduction - provides an introduction to GPS and DGPS technology, and the Vector
Sensor system.
Chapter 2: Installation - describes how to install the Vector Sensor, Vector Antenna Array, MBL-3,
and provides a foundation for interfacing it with an external navigation system or similar device.
Chapter 3: Overview - provides details on the fundamental operating modes of the Vector Sensor
system and its associated default parameters.
Chapter 4: Operation - describes how to configure and operate the Vector Sensor receiver.
Chapter 5: PocketMAX Utility - describes the general usage of the CSI Wireless PocketMAX
utility with the Vector Sensor.
Chapter 6: NMEA 0183 - describes the subset of NMEA 0183 commands and queries used to
communicate with the Vector Sensor.
Chapter 7: Frequently Asked Questions - This chapter provides answers to frequently asked
questions about the Vector Sensor system.
Chapter 8: Troubleshooting - provides you with diagnostic information to aid in determining a
source of difficulty for a particular installation.
Appendix A - Specifications: Details the technical characteristics of the Vector Sensor system.
Appendix B - Interface: Provides instructions to interface the Vector Sensor with external
devices.
Appendix C - Introduction to GPS and SBAS: Provides both general and specific information
relating to GPS and SBAS.
Appendix D - Resources: This appendix lists a number of different resources that may be useful
for the advanced user.
The Index provides a listing of the locations of various subjects within this manual.
Customer Service
If you encounter problems during the installation or operation of this product, or cannot find the
information you need, please contact your dealer, or CSI Wireless Customer Service. The contact
numbers and e-mail address for CSI Wireless Customer Service are:
Telephone number: +1-403-259-3311
Fax number: +1-403-259-8866