xStack
®
DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
201
The parameters are described as below:
Parameter Description
From/To
These two drop-down menus allow you to select a range of ports to which the filter settings
will be applied.
State
Enable or disable NetBIOS filter for the ports selected using the pull-down menu. The default
setting is Disable.
Extensive State
Enable or disable Extensive NetBIOS filter for the ports selected using the pull-down menu.
The default setting is Disable.
To implement the new settings, click Apply. Then the current configuration will be displayed in the NetBIOS Filtering Status
table.
To Next Page
Loading...
Need help?
General