xStack
®
DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
234
Figure 9- 9. Save Configuration Confirmation dialog box
Click the OK button to continue. Once the Switch configuration settings have been saved to NV-RAM, they become the default
settings for the Switch. These settings will be used every time the Switch is rebooted.
Reset
The Reset function has several options when resetting the Switch. Some of the current configuration parameters can be retained
while resetting all other configuration parameters to their factory defaults.
NOTE: Only the Reset System option will enter the factory default parameters into the Switch's
non-volatile RAM, and then restart the Switch. All other options enter the factory defaults into the
current configuration, but do not save this configuration. Reset System will return the Switch's
configuration to the state it was when it left the factory
Reset gives the option of retaining the Switch's User Accounts and History Log while resetting all other configuration parameters
to their factory defaults. If the Switch is reset using this window, and Save Changes is not executed, the Switch will return to the
last saved configuration when rebooted.
Figure 9- 10. Reset window
Reset System
In addition, the Reset System option is added to reset all configuration parameters to their factory defaults, save these parameters
to the Switch's non-volatile RAM, and then restart the Switch. This option is equivalent to Reset Config followed by Save
Changes.
Figure 9- 11. Reset System window
To Next Page
Loading...
Need help?
General