16DSL-2750B User Guide
Wireless Network
(SSID):
SSID Broadcast:
802.11 Mode:
Channel (FCC):
Channel Width
Mode:
Network
Authentication:
Service Set Identier (SSID) is the name of your wireless network. Create a name using up to 32
characters. The SSID is case-sensitive. For security reasons, do not choose a name with personal
information.
When this box is checked, the SSID (name of your wireless network) will broadcast. Wireless
clients within range of your Gateway will be able to see your network. For added security, you
may uncheck this box but will have to manually enter the SSID on your wireless clients.
Select the type of wireless clients that will connect to your wireless network.
802.11b/g Mixed - Select if you are using a mix of 802.11b and 11g wireless clients.
802.11g Only - Select if all of your wireless clients are 802.11g.
802.11b Only - Select if all of your wireless clients are 802.11b.
802.11b/g/n - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients.
802.11n Only - Select only if all of your wireless clients are 802.11n.
802.11g/n - Select if you are using a mix of 802.11n and 11g wireless clients.
Select the wireless channel. It is strongly recommended to select Automatic.
Select the Channel Width:
20MHz - This is the default setting. Select if you are not using any 802.11n wireless clients.
20/40MHz (dynamic) - Select if you are using both 802.11n and non-802.11n wireless
devices.
40MHz - Select if using only 802.11n wireless clients.
Select the authentication mode from the drop-down. Open System is the default settings.
When using WEP encryption, it is recommended to select Shared Key.
Wireless Network Settings
To Next Page
Loading...
Need help?
General
