66DSL-2750B User Guide
Date and Time
This feature allows you to set the date and time values on your Gateway.
Local Time:
Time Zone:
Daylight Saving Time:
Automatic Time Update:
Displays the current Gateway date and time.
Select your time zone from the drop-down menu.
Check to enable daylight saving time and then enter the desired Start and End values in
the elds provided. Click Apply to save the settings.
Check the Enable box to use a time server. Check either TOD or NTP protocol and then
enter the Update Every box with a value (in hours). Click Sync Now to connect to the server.
You may use the default server or add your own server information by clicking New Entry.
To Next Page
Loading...
Need help?
General
