61DSL-2750B User Guide
Disk Management
Enabled:
Status:
System Storage Area
Status:
Automatically Create
System Storage Area:
Disks:
Check to enable the disk management.
Displays the status of your USB drive.
Displays the status of the
Check to automatically create a system storage area for your USB drive. The default partition
name will be A. If you uncheck this box, you can rename the partition (storage area).
Displays information about your USB drive. Click on the Name of the drive to access more
information about the drive (see below). Also, click the name under Partitions to view the
les on your drive.