94DSL-2750B User Guide
Windows®
7/ Vista® Users
• Click on Start > Control Panel (make sure you are in
Classic View). Double-click on the Network and Sharing
Center icon. If you are using Windows Vista, click on
Manage network connections along the left panel in
the window. For Windows® 7, click on Change adapter
settings.
• Right-click on the Local Area Connection which
represents your wireless network adapter which will be
connected to your network.
• Highlight Internet Protocol Version 4 (TCP /IPv4) and
click Properties.
• Click Use the following IP address and enter an IP
address that is on the same subnet as your network or
LAN IP address on your router or network.
Example: If the router’s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number
between 2 and 99. Make sure that the number you choose is not in use on the network.
• Set Default Gateway the same as the LAN IP address of your router or gateway.
• Set Primary DNS the same as the LAN IP address of your router or gateway.
• The Secondary DNS is optional (you may enter a DNS server from your ISP).
• Click OK to save your settings.
To Next Page
Loading...
Need help?
General
