93DSL-2750B User Guide
Statically Assign an IP Address
Windows®
8 Users
• Press the Windows key and then type IP. Click
Settings on the right side and then click View
Network Connections.
• Right-click on the adapter which represents your
wireless network adapter.
• Highlight Internet Protocol Version 4 (TCP /IPv4)
and click Properties.
• Click Use the following IP address and enter an IP
address that is on the same subnet as your network
or LAN IP address on your router or network.
Example: If the router’s LAN IP address is
192.168.0.1, make your IP address 192.168.0.X
where X is a number between 2 and 99. Make sure
that the number you choose is not in use on the network.
• Set Default Gateway the same as the LAN IP address of your router or gateway.
• Set Primary DNS the same as the LAN IP address of your router or gateway.
• The Secondary DNS is optional (you may enter a DNS server from your ISP).
• Click OK to save your settings.
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow
the steps below:
To Next Page
Loading...
Need help?
General
