62DSL-2750B User Guide
Personal Domain Name (DDNS)
Dynamic DNS is a dynamic IP address that can aliased to a static host name, allowing a computer on the
network to be more easily accessible from the Internet.
Host Name:
Connection:
Provider:
User Name:
Password:
Oine:
SSL Mode:
Enter your full DDNS domain name (e.g. myrouter.dyndns.org).
Select the connection to which you would like to couple the DDNS service. The DDNS service will
only use the chosen device, unless failover is enabled. In this case, the failed-to device will be used
instead (assuming its route rules consent), until the chosen device is up again.
Select your DDNS service provider. The screen will refresh, displaying the parameters required by each
provider. The provider depicted herein is dyndns, which includes all available parameters.
Enter your DDNS user name.
Enter your DDNS password.
If you wish to temporarily take your site oine (prevent trac from reaching your DDNS domain
name), check this box to enable redirection of DNS requests to an alternative URL, predened in your
DDNS account. The availability of this feature depends on your account’s level and type of service.
With the gateway versions that support Secure Socket Layer (SSL), secured DDNS services are accessed
using HTTPS. Upon connection, the gateway validates the DDNS server’s certicate. Use this entry to
choose the certicate’s validation method.
To add your DDNS information, click New Dynamic DNS Entry.
To Next Page
Loading...
Need help?
General
