13-02 Stop Event
Option: Function:
[42] Auto Reset
Trip
This event is true if the frequency
converter is tripped (but not trip-
locked) and an automatic reset is
issued.
[43] OK Key This event is true if [OK] is pressed.
[44] Reset Key This event is true if [Reset] is
pressed.
[45] Left Key
This event is true if [◄] is pressed.
[46] Right Key
This event is true if [►] is pressed.
[47] Up Key
This event is true if [
▲
] is pressed.
[48] Down Key
This event is true if [
▼
] is pressed.
[50] Comparator 4 Use the result of comparator 4 in
the logic rule.
[51] Comparator 5 Use the result of comparator 5 in
the logic rule.
[60] Logic rule 4 Use the result of logic rule 4 in the
logic rule.
[61] Logic rule 5 Use the result of logic rule 5 in the
logic rule.
[70] SL Time-out 3 Use the result of timer 3 in the
logic rule.
[71] SL Time-out 4 Use the result of timer 4 in the
logic rule.
[72] SL Time-out 5 Use the result of timer 5 in the
logic rule.
[73] SL Time-out 6 Use the result of timer 6 in the
logic rule.
[74] SL Time-out 7 Use the result of timer 7 in the
logic rule.
[76] Digital Input
x30 2
[77] Digital Input
x30 3
[78] Digital Input
x30 4
[80] No Flow
[81] Dry Pump
[82] End of Curve
[83] Broken Belt
[90] ECB Drive
Mode
[91] ECB Bypass
Mode
[92] ECB Test Mode
[93] RS Flipop 6
[94] RS Flipop 0
[95] RS Flipop 1
[96] RS Flipop 2
13-03 Reset SLC
Option: Function:
[0] * Do not reset
SLC
Retain programmed settings in
parameter group 13-** Smart Logic.
[1] Reset SLC Reset all parameters in parameter
group 13-** Smart Logic to default
settings.
To Next Page
Loading...
Need help?
General