Danfoss vlt FC 102 Programming Guide

Contents
1 Introduction
4
1.1 Denitions
6
1.1.1 Frequency Converter 6
1.1.2 Input 6
1.1.3 Motor 6
1.1.4 References 7
1.1.5 Miscellaneous 7
1.2 Safety
9
2 How to Programme
11
2.1 Local Control Panel
11
2.1.1 How to Operate Graphical LCP (GLCP) 11
2.1.2 How to Operate Numeric LCP (NLCP) 15
2.1.3 Quick Transfer of Parameter Settings between Multiple Frequency Converters 17
2.1.4 Parameter Set-Up 17
2.1.5 Quick Menu Mode 17
2.1.6 Function Set-ups 19
2.1.7 Main Menu Mode 23
2.1.8 Parameter Selection 23
2.1.9 Changing Data 23
2.1.10 Changing a Text Value 23
2.1.11 Changing a Group of Numeric Data Values 24
2.1.12 Value, Step by Step 24
2.1.13 Read out and Programming of Indexed Parameters 24
2.1.14 Initialization to Default Settings 24
3 Parameter Descriptions
26
3.1 Parameter Selection
26
3.2 Parameters: 0-** Operation and Display
27
3.3 Parameters: 1-** Load and Motor
48
3.4 Parameters: 2-** Main Menu - Brakes
70
3.5 Parameters: 3-** Main Menu - Reference/Ramps
74
3.6 Parameters: 4-** Main Menu - Limits/Warnings
81
3.7 Parameters: 5-** Main Menu - Digital In/Out
86
3.8 Parameters: 6-** Main Menu - Analog In/Out
106
3.9 Parameters: 8-** Main Menu - Communications and Options
113
3.10 Parameters: 9-** Main Menu - PROFIBUS
125
3.11 Parameters: 10-** Main Menu - CAN Fieldbus
125
3.12 Parameters: 11-** Main Menu - LonWorks
125
3.13 Parameters: 13-** Main Menu - Smart Logic
126
Contents Programming Guide
M0010001 Danfoss A/S © 10/2019 All rights reserved. 1

Danfoss vlt FC 102 Specifications

General

Brand	Danfoss
Model	vlt FC 102
Category	DC Drives
Language	English