36-51 Terminal X49/9 Digital Output
Select the function of Terminal X49/9 as an analog voltage
output.
Option: Function:
[191] Dry Pump
[192] End Of Curve
[193] Sleep Mode
[194] Broken Belt
[195] Bypass Valve
Control
[196] Fire Mode
[197] Fire Mode was
Act.
[198] Drive Bypass
[200] Full capacity
[201] Pump 1
running
[202] Pump 2
running
[203] Pump 3
running
[236] Ext. CL 1 on
Ref
[237] Ext. CL 2 on
Ref
[238] Ext. CL 3 on
Ref
[240] RS Flipop 0
[241] RS Flipop 1
[242] RS Flipop 2
[243] RS Flipop 3
[244] RS Flipop 4
[245] RS Flipop 5
[246] RS Flipop 6
[247] RS Flipop 7
36-52 Terminal X49/9 Min. Scale
Range: Function:
0 %* [0 - 200 %] Match the minimum output of
terminal X49/9 with a required
value. For more information, see
parameter 36-42 Terminal X49/7 Min.
Scale.
36-53 Terminal X49/9 Max. Scale
Range: Function:
100 %* [0 - 200 %] Scale the maximum output of
terminal X49/9. For more
information, see
parameter 36-43 Terminal X49/7 Max.
Scale.
36-54 Terminal X49/9 Bus Control
Range: Function:
0 %* [0 - 100 %] This parameter contains the output
level of terminal X49/9 if the
terminal is controlled by a eldbus.
36-55 Terminal X49/9 Timeout Preset
Range: Function:
0 %* [0 - 100 %] The frequency converter sends the
value of this parameter to the
output terminal when the terminal
is controlled by a eldbus and a
timeout is detected.
3.29.7 36-6* Output X49/11
Use the parameters in this group to congure the mode of
inputs and outputs of VLT
®
Programmable I/O .
36-60 Terminal X49/11 Analogue Output
Select the functionality of terminal X49/11.
Option: Function:
[0] * No operation
[52] MCO 0-20mA/
0-10V
[86] Pressure
Sensor 1
[88] Pressure
Sensor 2
[93] Pressure
Sensor 3
[100] Output freq.
0-100
[101] Reference
Min-Max
[102] Feedback
+-200%
[103] Motor cur. 0-
Imax
[104] Torque 0-Tlim
[105] Torque 0-
Tnom
[106] Power 0-Pnom
[107] Speed 0-
HighLim
[113] Ext. Closed
Loop 1
[114] Ext. Closed
Loop 2
[115] Ext. Closed
Loop 3
[121] Air pres. to
Flow
[139] Bus ctrl.
[141] Bus ctrl t.o.
Parameter Descriptions Programming Guide
M0010001 Danfoss A/S © 10/2019 All rights reserved. 269
3 3
To Next Page
Loading...
Need help?
General