To Next Page

To Previous Page

ENTER/EXIT PROGRAMMING MODE 1D SYMBOLOGIES

130

QUICKSCAN™ 2500

GS1 DataBar Expanded Set Length 2

This feature specifies one of the bar code lengths for "GS1 DataBar Expanded Length

Control" on page 129

. Length 2 is the maximum label length if in Variable Length Mode,

or the second fixed length if in Fixed Length Mode. Length includes the bar code’s data

characters only.

The length can be set from 1 to 74 characters. A setting of 00 specifies to ignore this

length (only one fixed length). See "

Set Length 2" on page 289 for more detailed pro-

gramming instructions.

Select GS1 DataBar Expanded Set Length 2 Setting

$CXBL2

To configure this feature, scan the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar

code at left followed by the digits from the Alphanu-

meric characters in Appendix D, Keypad represent-

ing your desired character(s). End by scanning the

ENTER/EXIT bar code again.

Make a mistake? Scan the CANCEL bar code to abort

and not save the entry string. You can then start

again at the beginning.

CANCEL



Length 2 = 74 (74 characters)

Datalogic QuickScan 2500 Series User Manual

Other manuals for Datalogic QuickScan 2500 Series