Datalogic QuickScan 2500 Series User Manual

REPLACING THE BATTERY PACK
PRODUCT REFERENCE GUIDE 15
REPLACING THE BATTERY PACK
Use the following procedure to charge the reader’s battery:
1. With a screwdriver, unscrew the battery pack screw and extract the battery pack
from its slot.
2. Insert the new battery pack in the same position, then insert the screw in the han-
dle and screw it into place.
NOTE: Before using the battery, read "Battery Safety" on page 6. Datalogic
recommends annual replacement of rechargeable battery packs to ensure
maximum performance.

Datalogic QuickScan 2500 Series Specifications

General

Brand	Datalogic
Model	QuickScan 2500 Series
Category	Barcode Reader
Language	English