PRODUCT REFERENCE GUIDE
307
APPENDIX B
STANDARD DEFAULTS
The most common configuration settings are listed in the “Default” column of the table
below. Page references are also provided for feature descriptions and programming bar
codes for each parameter. A column has also been provided for recording of your pre-
ferred default settings for these same configurable features.
Table 36 Standard Defaults
PARAMETERS DEFAULT
YOUR SETTING PAGE NUMBER
GLOBAL INTERFACE FEATURES
Host Commands — Obey/Ignore Obey 29
USB Suspend Mode Enable 29
RS-232 ONLY
Baud Rate 9600 31
Data Bits 8 Data Bits 32
Stop Bits 1 Stop Bit 32
Parity None 33
Handshaking Control RTS 34
RS-232/USB-COM
Intercharacter Delay No Delay 36
Beep On ASCII BEL Disable 37
Beep On Not on File Enable 37
ACK NAK Options Disable 38
ACK Character ‘ACK’ 39
NAK Character ‘NAK’ 39
ACK NAK Timeout Value 200 msec 40
ACK NAK Retry Count 3 Retries 39
ACK NAK Error Handling Ignore Errors Detected 41
To Next Page
Loading...
Need help?
General
