Datalogic QuickScan 2500 Series User Manual

TECHNICAL SPECIFICATIONS
294 QUICKSCAN™ 2500
Table 28 QBT/QM2500 Technical Specifications
ELECTRICAL CHARACTERISTICS
Power Supply
Gun TypeC Port: 5V +/- 5%
Cradle Port: 4.5V to 14V
Consumption
(Typical)
Cradle Only: 45mA @5V (Operating)
Cradle with gun during recharge:
500mA (5V USB Host Power Supply)
1100mA (5V Type-C Host Power Supply)
500mA (12V External Power Supply)
Gun charging through Type-C port:
500mA (USB Type-A Host port, no Scan)
1040mA (Wall Adapter, no Scan)
1040mA (USB Type-C Host port, no Scan)
Reading Indicators Top illumination, Good Read Spot, Beep
Max. Scan Rate 60 frames/sec
Battery Capacity Li-Ion 3.6V, 3250mAh (11.7 W/h)
Recharge Time
(Typical)
Gun Only:
- USB Type-A Host to Type-C connector: 5h 30m
- USB Wall Adapter to Type-C connector: 3h
- USB Type-C Host to Type-C connector: 3h
Gun on Cradle:
- USB Type-A Host: 8h
- External 12V Power Supply: 4h
- USB Type-C Host: 4h
OPTICAL CHARACTERISTICS
Optical Format 1/4"
Active Imager Size 3896 um (H) x 2453 um (V)
Active Pixels 1280 H x 800 V
Illumination System
LED source
Red Emission (wavelength - 617 nm)
Aiming System
LED source
Blue Emission (wavelength - 468nm)
Ambient Light Up to 0 - 110,000 lux
Tilt Tolerance
a
a. Based on ISO 15423 specifications
0° - 360°
Pitch Tolerance
a
+/- 65°

Datalogic QuickScan 2500 Series Specifications

General

Brand	Datalogic
Model	QuickScan 2500 Series
Category	Barcode Reader
Language	English