6. Install the battery.
7. Install the base cover.
Touchpad
Removing the touchpad
CAUTION: The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in Before working inside your computer.
NOTE: Ensure that your computer is in Service Mode. For more information, see step 6 in Before working inside your
computer.
2. Remove the base cover.
3. Remove the battery.
About this task
NOTE: Before removing the base cover, ensure that there is no microSD card that is installed in the microSD-card slot on
your computer.
The following image(s) indicate the location of the touchpad and provides a visual representation of the removal procedure.
Removing and installing Field Replaceable Units (FRUs)
85
To Next Page
Loading...
Need help?
General
