Table 1. Supported remote access connections
Connection Features
CMC Network Interface ports
• Gb ports: Dedicated network interface for the CMC web interface. The CMC has two
RJ-45 Ethernet ports:
– Gb1 (the uplink port)
– Gb2 (the stacking or cable consolidation port). The STK/Gb2 port can also be used
for CMC NIC failover.
NOTE: Ensure that the CMC setting is changed from default Stacking to
Redundant to implement NIC failover.
CAUTION: Connecting the STK/Gb2 port to the management network will
have unpredictable results if the CMC setting is not changed from default
Stacking to Redundant, to implement NIC failover. In the default Stacking
mode, cabling the Gb1 and STK/Gb2 ports to the same network
(broadcast domain) can cause a broadcast storm. A broadcast storm can
also occur if the CMC setting is changed to Redundant mode, but the
cabling is daisy chained between chassis in the Stacking mode. Ensure
that the cabling model matches the CMC setting for the intended usage.
• DHCP support.
• SNMP traps and e-mail event notification.
• Network interface for the iDRAC and I/O Modules (IOMs).
• Support for Telnet/SSH command console and RACADM CLI commands including
system boot, reset, power-on, and shutdown commands.
Serial port
• Support for serial console and RACADM CLI commands including system boot, reset,
power-on, and shutdown commands.
• Support for binary interchange for applications specifically designed to communicate
with a binary protocol to a particular type of IOM.
• Serial port can be connected internally to the serial console of a server, or I/O module,
using the connect (or racadm connect) command.
Supported platforms
The CMC supports the PowerEdge FX2 and FX2s chassis models. The supported platforms are PowerEdge FC630, PowerEdge
FM120x4, and PowerEdge FC830. For information about compatibility with CMC, see the documentation for your device.
For the latest supported platforms, see the Dell Chassis Management Controller (CMC) Version 1.4 for Dell PowerEdge FX2/FX2s
Release Notes available at dell.com/support/manuals.
Supported web browsers
For the latest information about supported web browsers, see the Dell Chassis Management Controller (CMC) Version 1.4 for Dell
PowerEdge FX2/FX2s Release Notes at dell.com/support/manuals.
• Microsoft Internet Explorer 9
• Microsoft Internet Explorer 10
• Microsoft Internet Explorer 11
• Microsoft EDGE
• Safari version 7.1
• Safari version 8.0
• Mozilla Firefox version 40
• Mozilla Firefox version 41
• Google Chrome version 49
• Google Chrome version 50
15
To Next Page
Loading...
Need help?
General
Weight and Dimensions
