Delta DVP-SS2 User Manual

Issue Description of Changes Date
Chapter 3.8 Detailed Instruction Explanation:
Increase explanations of DSPA instruction, and
add floating-point contact type comparison
instructions FLD=, FLD>, FLD<, FLD<>, FLD<=,
FLD>=, FAND=, FAND>, FAND<, FAND<>,
FAND<=, FAND>=, FOR=, FOR>, FOR<, FOR<>,
FOR<=, FOR>=; add the supplementary
description of PLSR instruction and the
description of K11~K19 in DTM instruction
mode; update the description of API166
instruction.
4
th
1. SE is added in the title of the manual.
2. Chapter 2.16: The default value in D1062 is K10.
3. API 15 in Chapter 3: The contents about S<D are
deleted in program example 3.
4. API 148 and API 149 are added in Chapter 3.
5. The information related to DVP-SE is added.
6. The information related to DVP32ES-C is added.
7.
The descriptions of the models are added in the
contents.
8. Appendix A is added.
2012/07/01
5
th
1. API 113 is added.
2. API150 is updated.
3. Chapter 7 is updated.
2012/09/01
6
th
1. M1148, M1580, M1581, M1584, M1585, M1182,
and M1183 are added to Chapter 2.
2. Chapter 3 is updated. API53, API 156, API 159,
API69, API88, API143, API150, API155, API258,
and API296-313 are added.
3. The description of API 178 is updated.
4. The description of the input/output mapping
areas for DVP-ES2-C as a slave station is added
to section 7.1.2.
5. C232, C249, and C250 are deleted from the
description of the SE memory Map.
6. Appendix B is added.
2013/02/20

Delta DVP-SS2 Specifications

General

Brand	Delta
Model	DVP-SS2
Category	Controller
Language	English