DVP-ES2/EX2/EC5/SS2/SA2/SX2/SE&TP Operation Manual - Programming
B-14
B.5 EtherNet/IP List
EtherNet/IP is a communication protocol defined by ODVA, and is different from the Ethernet
mentioned in the previous sections. DVP-12SE (whose version are 1.20 or above), DVP26SE
and ES2-E Series PLCs support the EtherNet/IP slave communication protocol. The other DVP
series PLCs can communicate with products related to EtherNet/IP through IFD9507 (an
EtherNet/IP-MODBUS converter). The EtherNet/IP objects which are supported are described
below.
B.5.1 EtherNet/IP Information Supported by DVP-SE / ES2-E Series PLCs
(1) Object list
Object Name
(2) Data types
(3) Error codes
The forwarding function can not be enabled.
0x04 Path Segment Error
The segment type is not supported.
(ref. V1 C-1.4)
The instance is not supported.
The service (Get or Set) is not supported.
The value written is incorrect.
The setting of the attribute is not allowed.
The length of the data written is too short.
The attribute is not supported.
The length of the data written is too long.
The object is not supported.
0x20 Invalid Parameter
The service parameter is not supported.
(ref. V1 5-2.3.1)