Delta DVP-SS2 User Manual

3. Instruction Set
3-427
Program Example 2:
M1018 = ON, degree mode. When X0 = ON, DCOS instruction performs cosine operation on the
degree value (0°≦degree＜360°) in (D1, D0) and stores the COS value in (D11, D10) in binary
floating format..
M1002
SET M1018
X0
DCOS D0 D10
D 1 D 0
D 11 D 10
Degree value
COS value
binary floating point

Delta DVP-SS2 Specifications

General

Type	PLC (Programmable Logic Controller)
Input Voltage	24 VDC
Number of Inputs	8
Number of Outputs	6
Programming Software	WPLSoft
Model/Series	DVP-SS2
Communication Ports	RS-232
Output Type	Relay
High-speed Counters	2 points, 10 kHz
Operating Temperature	0°C to 55°C
Humidity	5% to 95% RH, non-condensing
Dimensions	90 mm (H) x 60 mm (W) x 80 mm (D)