OPERATION
EPT031055 Issue 2 September 2017 3-37
Add a Shape: Arc/Rectangle
To add a shape to the message:
(1) Press on the screen within a specific area of the Message Editor
where you require the item to appear. A cross hair will appear at this
location.
(2) Select the Add Shape icon and select arc or rectangle.
(3) Specify the properties of the arc or rectangle.
(4) Select the green tick icon to insert the shape into the message.
(5) Edit the arc/rectangle by highlighting the shape within the message
and using the sub-menu or by selecting More…
(6) Activate the message for printing by sending it to the printer via
the File menu .
Arc Object Properties
The property values are the same as the general property values and text
property values.
Angle - Sets the angle in degrees that the circle is to encompass. The
default setting is 360.
Line Segments - Sets the number of line segments used in the circle. A
higher number creates a more perfect circle. The minimum of three creates
a triangle.
Border Lines - Sets the number of concentric circles or arcs used.
Object Name - Gives a unique name to the object.
Rectangle Object Properties
The property values are the same as the general property values and text
property values.
Border Lines - Sets the number of rectangles.
Object Name - Enter a unique name for the object. This can be edited and
modified.
To Next Page
Loading...
Need help?
General
