Ecotech A Series User Manual

EC9830 CO ANALYZER OPERATION MANUAL
2 98307600 Rev. C-1
Notice
The information contained in this manual is subject to change without notice and
does not represent a commitment on the part of the Ecotech Pty Ltd. Ecotech
reserves the right to make changes in construction, design, specifications, and/or
procedures that may not be reflected in this manual.
Copyright © 2005. All rights reserved. Reproduction in any form is prohibited
without the written consent of Ecotech Pty Ltd.
This manual is furnished on the express condition that the information herein will
not be used for second source procurement, or purposes directly or indirectly
detrimental to the interests of Ecotech.

Ecotech A Series Specifications

General

Brand	Ecotech
Model	A Series
Category	Measuring Instruments
Language	English

Summary

Manual History

Revision History

Details the revisions made to the manual, including dates and summaries of changes.

Notice

Mark Declaration and Conformity

Scope of Declaration

Defines the analyzer models covered by the declaration and lists compliance standards.

Internationally Recognized Symbols

Safety Requirements and Equipment Details

Equipment Rating

Specifies the electrical rating and environmental conditions for the analyzer.

Environmental Conditions

Details the acceptable relative humidity, temperature, and altitude for operation.

Factory Service and Support

Factory Service

Procedure for obtaining factory repair services and required information.

Service and Spare Parts

Contact information and services for customer support and spare parts.

Claims and Discrepancies

Claims for Damaged Shipments

Steps for reporting and claiming for damaged equipment upon receipt.

Shipping Discrepancies

Procedure for reporting shortages or discrepancies against the packing list.

Warning

1.0 Description of EC9830 Analyzer

1.1 Specifications

Detailed technical specifications including range, noise, drift, and performance metrics.

1.2 U.S. EPA Reference Method

Information on the EC9830's designation as a U.S. EPA reference method.

2.0 Installation and Operation

2.1 Mechanical Installation

Instructions for physical installation, including location and connections.

2.2 AC Power Connection

Steps for connecting the analyzer to AC power and display adjustments.

2.3 Operation

General procedures for operating the analyzer using the front panel controls.

2.4 Analyzer Calibration

Procedures for calibrating the analyzer to ensure accuracy.

2.5 Menus and Screens

Overview of the analyzer's menu structure and screen displays.

2.6 Analog Output

Configuration and connection of analog outputs for data recording.

2.7 Password Protection

How to enable and use password protection for configuration settings.

3.0 Calibration Procedures

3.1 Overview and Instructions

Introduction to calibration concepts and basic instructions.

3.2 Multipoint Calibration Procedures

Detailed methods for multipoint calibration using gas.

3.4 Automatic Zero/Span Checks (AZS)

Explanation and setup of automatic zero/span checks for calibration maintenance.

4.0 Digital Communication

4.1 Discrete Control

Using discrete I/O signals for analyzer control.

4.2 Serial Control

Using RS232 serial ports for communication.

4.4 Serial Command Control

Commands for controlling the analyzer via serial interface.

4.5 USB Communication

Connecting and communicating via USB.

4.6 EC9800 Communicator Software

Software for downloading data and remote control.