Epson Aculaser C1700 Series User Manual

Non Genuine Toner Mode
When toner within a toner cartridge is empty, a toner indicator lights up or blinks, and at the same
time, the
(Error) indicator lights up depending on the printer status. For details on indicators, refer to
“Understanding the Operator Panel Lights” on page 62.
When you want to use the printer in the Non Genuine Toner mode, enable the Non Genuine Toner
mode and replace the toner cartridge.
Important:
If you use the printer in the Non Genuine Toner mode, the performance of the printer may not be at its
optimum. And any problems that may arise from the use of the Non Genuine Toner mode are not
covered by our quality guarantee. The continuous use of the Non Genuine Toner mode can also cause the
printer to break down, and any repair charges for such break down will be incurred by users.
Note:
To disable the Non Genuine Toner mode, deselect the check box next to On on the Non Genuine Toner
page on the Printer Setting Utility.
The Printer Setting Utility
The following procedure uses Windows XP as an example.
1. Click start — All Programs — EPSON — EPSON Printer Software — EPSON AL-C1700 —
Printer Setting Utility.
Note:
The Select Printer window appears in this step, when multiple print drivers are installed on your
computer. In this case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility opens.
2. Click the Printer Maintenance tab.
3. Select Non Genuine Toner from the list at the left side of the page.
The Non Genuine Toner page is displayed.
4. Select the check box next to On, and then click the Apply New Settings button.
Epson AcuLaser C1700 Series User’s Guide
Troubleshooting 100

Epson Aculaser C1700 Series Specifications

General

Brand	Epson
Model	Aculaser C1700 Series
Category	Printer
Language	English