Epson Aculaser C1700 Series User Manual

Problem Action
The envelope is creased after printing. Ensure that the envelope is loaded as instructed in “Loading Envelope in the
Multipurpose Feeder (MPF)” on page 43.
Page breaks in unexpected places.
Increase the value for Job Time-Out in the System Settings menu, that is on the
Printer Maintenance tab in the Printer Setting Utility.
Print media does not stack neatly in the
center output tray.
Turn the print media stack over in the MPF.
Job prints from the wrong source or on
the wrong print media.
Check Paper Type in the print driver.
Print Quality Problems
Note:
In this section, some procedures use the Printer Setting Utility or Status Monitor.
See also:
❏ “Printer Setting Utility (Windows Only)” on page 19
❏ “Status Monitor (Windows Only)” on page 19
The Output Is Too Light
Epson AcuLaser C1700 Series User’s Guide
Troubleshooting 81

Epson Aculaser C1700 Series Specifications

General

Brand	Epson
Model	Aculaser C1700 Series
Category	Printer
Language	English