Epson Aculaser C1700 Series User Manual

Printing Problems
Problem Action
Job did not print or incorrect characters
printed.
Ensure that the
(Ready/Data) indicator is lit.
Ensure that print media is loaded in the printer.
Verify that you are using the correct print driver.
Ensure that you are using the correct USB cable and that it is securely connected to
the printer.
Verify that the correct print media size is selected.
If you are using a print spooler, verify that the spooler has not stalled.
Print media misfeeds or multiple feeds
occur.
Ensure that the print media you are using meets the specifications for your printer.
See also:
“Usable Print Media” on page 35
Fan the print media before loading it.
Ensure that the print media is loaded correctly.
Ensure that the paper width guides and length guide are adjusted correctly.
Do not overfill the print media sources.
Do not force print media into the MPF when you load it.
Otherwise, it may skew or buckle.
Ensure that the print media is not curled.
Load the recommended print side correctly for the type of print media you are
using.
See also:
“Loading Print Media” on page 36
Turn the print media over or around and try printing again to see if feeding
improves.
Do not mix print media types.
Do not mix reams of print media.
Remove the top and bottom curled sheets of a ream before loading the print media.
Load a print media source only when it is empty.
Epson AcuLaser C1700 Series User’s Guide
Troubleshooting 80

Epson Aculaser C1700 Series Specifications

General

Brand	Epson
Model	Aculaser C1700 Series
Category	Printer
Language	English