Epson DS-360W User Manual

Using the Scanner on the Battery
Notice on Using the Battery
❏ When the AC adapter is not connected and the scanner is connected by USB 2.0 or Wi-Fi to the computer, the
scanner runs on the battery. If the battery becomes runs out and the battery light turns o, you cannot scan. We
recommend connecting the AC adapter to the scanner when the battery lamp starts ashing.
❏ When the scanner is run on USB 3.0 bus power, the scanning speed may become slower when the battery is
running low and the battery light starts
ashing
fast.
Related Information
& “Buttons and Lights” on page 15
Charging the Battery
Battery Charging Precautions
❏ e battery slowly runs down even when you do not use the scanner. Charge the battery before you run the
scanner using the battery.
❏ We recommend turning o the scanner when not in use to save the battery. You can also set the scanner to turn
o automatically aer a specied period of time.
❏ e battery’s usable time is shorter in low temperature environments, even if you have charged the battery fully.
❏ You do not need to wait for the battery to run out before charging it.
❏ e battery may be hot right aer it is charged or used; this is normal.
❏ e battery cannot be charged or the battery may deteriorate if you charge it in low or high temperatures.
Charge the battery within the guaranteed charging temperature range.
❏ If the battery runs out quickly even aer it has been fully charged, the battery may be at the end of its service
life. Contact Epson support to replace the battery.
❏ If you do not use the scanner for a long time, charge the battery using the AC adapter on a regular basis to avoid
letting it run out.
User's Guide
Using the Scanner on the Battery
21

Epson DS-360W Specifications

General

Brand	Epson
Model	DS-360W
Category	Printer
Language	English