5. Slide the edge guides to t the edge of the envelope making sure there are no gaps between the envelope and
the edge guides. Otherwise, the envelope may be fed skewed.
Note:
To scan envelopes, we recommend selecting the appropriate rotation angle or Auto in Rotate on the Main Settings tab
in Epson Scan 2 before scanning. See the Epson Scan 2 help for details.
Related Information
& “Basic Scanning” on page 52
& “Advanced Scanning” on page 63
Placing Plastic Cards in the Card Slot
Specications
for Plastic Cards for Scanning from the Card Slot
ese are the specications for plastic cards that you can load into the scanner from the card slot.
Note:
❏ You can scan plastic cards from the card slot at the front. You cannot scan from the ADF.
❏ Although you cannot scan card from ADF, you can leave the ADF as the Document Source setting in Epson Scan 2.
Size Card Type Thickness Loading Capacity Loading Direction
ISO781A ID-1 Type
54.0×85.6 mm
(2.1×3.3 in.)
Without embossing 1.0 mm (0.04 in.) or
less
1 card Vertical (Portrait)
Types of Cards that Require Attention
e following types of cards may not be successfully scanned.
❏ ISO781A ID-1 Type plastic cards with emboss (the thickness should be 1.24 mm (0.05 in.) or less)
User's Guide
Specications of Originals and Placing Originals
48
To Next Page
Loading...
Need help?
General