54
4. Select the Dynamic Contrast setting and press Enter.
5. Select one of the following options and press Enter.
• Normal to adjust brightness at the standard speed.
• High Speed to adjust brightness as soon as the scene changes.
6. Press the esc button to exit the menus.
Parent topic: Color Mode
Related references
Image Quality Settings - Picture Menu
Adjusting Image Quality in Detail
You can fine-tune various aspects of how quality and colors are displayed in your projected images.
Note: To optimize the color tone according to the scene and to make the image more vivid, correct the
image by adjusting the Scene Adaptive Gamma setting.
1. Turn on the projector and display an image.
2. Press the settings button on the remote control.
To Next Page
Loading...
Need help?
General
