Epson FX Series User Manual

Appendix E
Defaults and DIP Switches
In this Appendix we list the default settings for your printer, show-
ing which settings you can change and the way you can change them.
Some of the defaults can be changed by using DIP switches; the sec-
ond section illustrates and discusses those defaults.
Default Settings
When your FX comes from the factory, it is set to the following
defaults. An asterisk (*) means that you can change the default for
this setting by changing a DIP switch, while a bullet (•) means that
you can change this setting in a program, by using an ESCape code.
* l Printer activated
l Roman character font
* l Pica pitch
l Margins set at maximums: left margin at 0, and, since the default
is Pica, the right margin at 80 on the FX-80 and at 136 on the
FX-100
l 12-dot line spacing
l 66 lines (11 inches of default line spacing)
l Vertical tabs set at every two lines
l Vertical tab channel 0 selected
l Horizontal tabs set at every eight spaces
* l USA character set
295

Epson FX Series Specifications

General

Brand	Epson
Model	FX Series
Category	Printer
Language	English