Mains Connection and Power On
Connect the printer to the mains using the power cord. First connect the
cable to the power cord socket and then to the mains.
Do not plug into the same wall outlet other equipment besides the printer
such as coffee machines, copy machines, or air conditioners.
The power On/Off lever switches the printer‘s power supply ON or OFF.
Since the power cord serves as a safety cut-off, its connection to the
printer must be accessible any time.
the printer performs an internal self-test which checks the
electronics, the print head carriage movement, and the interface. Power ON is
indicated by a green LED on the operator panel, the first panel message is
RIBBON UNLOCKED - CHECK RIBBON ...
steps in on page paragraph
When the internal test has been completed successfully the display shows
if data have already been transmitted.
If the display shows anything different please refer to chapter
To Next Page
Loading...
Need help?
General