Epson SC-F2000 User Manual

SC-F2000 Revision C
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 109
Confidential
3.4.5.3 PRINT HEAD
x
1. Unlock the CR UNIT. (p69)
2. Remove the CR COVER. (p103)
3. Disengage the hook, and remove the Tube Guide Holder.
A D J U S T M E N T
R E Q U I R E D
When replacing/removing this part, refer to “4.1.2 Adjustment
Items and the Order by Repaired Part” (p194) and make sure to
perform the specified operations including required adjustment.
C A U T I O N
 Be careful not to touch the nozzle surface of the PRINT HEAD.
 The PRINT HEAD can be replaced without “Tube inner
pressure reduction”. (thanks to the DAMPER KIT's self
sealing valve, no need to do Tube inner pressure reduction”.)
C H E C K
P O I N T
Remove films and/or sponges of the INK MISTCAOVER ASSY if
attached. (p114)
Insert the protrusion of the Tube Guide Holder in the hole on the
CR UNIT.
Tube Guide Holder
Protrusion
CR UNIT

Epson SC-F2000 Specifications

General

Brand	Epson
Model	SC-F2000
Category	Printer
Language	English