SC-F2000 Revision C
ADJUSTMENT TF Adjustments 263
Confidential
[Blue]: Button or menu name on the program screen / [Black]: Button or menu name on the operation panel of the printer
4.13.7 TF Adjustment
REQUIRED TOOL
Media for adjustment
Size: A4
Type:
Premium Glossy Photo Paper (250)
Manual vaporizer
EXECUTION MODE
Normal Mode
PROCEDURE
1. Set the media for adjustment referring to "4.1.5 How to set the media for
adjustment" (p.208)
2. Turn the printer ON.
3. Start the Service Program and select [TF Adjustment].
4. Click [PRINT] and make sure the start light is on, then press [START].
The adjustment pattern is printed.
5. Visually check the adjustment pattern.
Select the pattern on which the white band is the least visible, then enter the result
into the program. Click [INPUT] after entering the result.
Figure 4-67. Adjustment Pattern
Figure 4-68. [TF Adjustment] Screen
6. Click [PRINT] and press the [START] button to print the adjustment pattern
again.
7. Visually check the adjustment pattern.
Repeat Step 4 to Step 7 until all the patterns with the least visible white lines
become # 0.
An odd number can be input.
-8 -6 -4 -2 0 2 4 6 8
-8 -6 -4 -2 0 2 4 6 8
To Next Page
Loading...
Need help?
General