SC-F2000 Revision C
ADJUSTMENT Counter Reset 221
Confidential
[Blue]: Button or menu name on the program screen / [Black]: Button or menu name on the operation panel of the printer
4.7 Counter Reset
Whenever the parts/units which have life counter are replaced, the corresponding life
counter must be reset. This is important to replace those parts/units at the correct
timing.
EXECUTION MODE
Serviceman Mode
PROCEDURE
1. Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [RIGHT] + [DOWN] + [OK].
2. Start the Service Program and click [FLAG CHANGE & COUNTER RESET]
from the main menu.
3. Choose one of the counter reset menus to be reset.
4. Click [Reset] to reset the counter.
5. Restart the printer.
The life counters are saved in the circuit board by restarting.
6. With NVRAM Viewer, verify that the counter has been reset to “0”.
Figure 4-14. [COUNTER RESET] Screen
The history of the Counter Clear can be checked per counter on the
NVRAM Viewer (P. 212).
Table 4-10. Counter Reset Item List
Parts Menu name
Motors of
Mechanism
CR MOTOR ASSY CR Motor Counter
TF MOTOR ASSY TF Motor Counter
Ink System
components
PRINT HEAD Print Head Counter
DAMPER KIT Damper Kit exchange Counter
PUMP CAP ASSY Pump Cap Unit Counter
RIGHT INK HOLDER
ASSY
Ink Holder Counter (Home)
LEFT INK HOLDER
ASSY
Ink Holder Counter (Full)
BUFFER ASSY Buffer counter (Home)
CIRCULATION PUMP
ASSY
Circulation + Buffer counter (Full)
INK TUBE Ink tube counter
Waste Ink Bottle Waste ink counter reset
Components of
Mechanism
CR SCALE CR Scale exchange counter
To Next Page
Loading...
Need help?
General