SC-F2000 Revision C
MAINTENANCE Lubrication 298
Confidential
[Lubrication 9] [Lubrication 10]
Part Name Sintered bushing
Lubricants (Part Code) G-84 (1516265)
Amount 1.5 cc ± 0.1 cc × 4 parts
Lubrication Tool φ 2 mm injector
Lubrication Manner Apply the lubricate on the back of the Sintered bushing.
Note Be careful not to apply the lubricant beyond the specified point.
TABLE ASSY
Sintered bushing
Sintered bushing
Lubrication
Point
Part Name Right TF Shaft Frame Assy
Lubricants (Part Code) G-26 (1080614)
Amount φ 2 mm
Lubrication Tool φ 2 mm injector
Lubrication Manner
Apply the lubricate on the portion where it contacts with the TF Driven
Shaft.
Note Be careful not to apply the lubricant beyond the specified point.
Right TF Shaft
Frame Assy
Lubrication Point
To Next Page
Loading...
Need help?
General