Epson T-B Series User Manual

T3-B T6-B Manipulator 3. Environments and Installation
T-B series Rev.1 53
3.6 Power Supply
WARNING
■ There is no power switch on the Manipulator. Right after inserting power plug to
power, the Robot System turns ON.
Be careful about electric shock when inserting power plug.
3.6.1 Specifications
Ensure that the available power meets following specifications.
Item
Specification
Voltage
100 to 240 VAC
(Input voltage should be with in ±10 % of the rated voltage.)
Phase
Single phase
Frequency
50/60 Hz
Momentary Power Interrupt
Less than 10 msec.
Rated Capacity
T3-B: 660 VA
T6-B: 1,200VA
Short-circuit
Current Rating
5kA
Maximum Load Current
T3-B: 3.3A
T6-B: 6.0A
Peak Current
(When AC power is turned ON)
T3-B: Max. 30A (2 ms or less)
T6-B: Max. 60A (2 ms or less)
Leakage Current
Max. 10 mA
Ground Resistance
TN ground (100 Ω or less)

Epson T-B Series Specifications

General

Brand	Epson
Model	T-B Series
Category	Robotics
Language	English