Epson TM-m30III User Manual

133
Appendix
Bluetooth Interface
Specification
• Bluetooth 5.0 Dual mode
• Bluetooth Power Class 2
• Built-in antenna
• Device name setting is possible
• Pairing information of up to 8 devices can be registered
Initial Settings
Countries where Bluetooth can be used are limited. Since notes are provided for each country, check
the sheet supplied with the product.
Setting Contents Setting Items Initial Settings
Bluetooth communication
settings
Bluetooth device name "TM-m30III_xxxxxx"
(Where xxxxxx is the last six digits in the serial
number)
Bundle Seed ID "TXAEAV5RN4"
Enable/Disable auto reconnect to
iOS device
"1" (Enable)
Bluetooth Security Middle
Bluetooth communication interval
during power saving mode
Level 1 (Standard)
When the security level is set to "Low", pairing is always possible, which increases the possibility of
unauthorized use by a third party. Change the setting at your own discretion and responsibility with
full understanding of the risk.

Epson TM-m30III Specifications

General

Type	POS printer
Print technology	Thermal
Maximum resolution	203 x 203 DPI
USB port	Yes
Serial interface	-
Connectivity technology	Wired & Wireless
Ethernet LAN	No
Internal memory	- MB
Product color	White
Mobile operating systems supported	Android, iOS