28
Chapter 1 Product Overview
Simple Setup for Wireless LAN
The printer has "SimpleAP" mode that allows a device to directly connect to the printer without using an access
point. This makes it easy to set up a printer to connect to a wireless LAN using the printer setting tool, without
having to go through a network environment such as an access point.
When all of the following conditions are met and the printer is turned on, SimpleAP will start automatically.
After startup, a "SimpleAP Start" sheet will be printed.
• No USB cable is connected
• No LAN cable is connected
• SSID and passphrase are not set
• Never connected via Bluetooth
• Wireless LAN unit is connected (when using the wireless LAN unit)
Even if you are using the optional wireless LAN unit, the "SimpleAP Start" sheet described above will be printed
when SimpleAP automatically starts up when the printer is turned on.
If SimpleAP does not start automatically (the "SimpleAP Start" sheet is not printed), start SimpleAP from the
menu that can be selected after printing the status sheet guidance or from the interface setup mode.
Reference: "Setup using Web Config" on page 58
"Interface Setup Mode" on page 83
If you have changed the wireless LAN connection settings from the default settings for your environment and
d
evices, start according to those settings and connect to the access point.
"SimpleAP Start" sheet
To Next Page
Loading...
Need help?
General
