53
Chapter 2 Setup
Bluetooth Interface
Pair the printer with your device using the Bluetooth function of the device or using other methods.
Pairing the printer is also possible by using EPSON TM Bluetooth Connector (Windows) or Epson TM Utility
(iOS or Android).
Setting up from a Smart Device
How to connect a smart device to a printer via Bluetooth is also introduced in the video manual.
Please see the video manual at the following URL.
https://www.epson-biz.com/?prd=tm-m30iii-series&inf=bt-video-ww
Necessary Items
Prepare the following items.
• Smart device for setting: iOS or Android device
• Printer
Setup Procedure
1
On your smart device, open the Bluetooth settings from Settings.
2
Turn on Bluetooth on the smart device.
3
Open the roll paper cover of the printer, and then hold down the Feed button until
the paper LED starts flashing, then release the button.
4
Close the roll paper cover.
A guidance that starts with "Next Action" will be printed.
• When an optional wireless LAN unit is connected, the Bluetooth function of the printer cannot be
used.
• If the host computer and the printer are not connected on a continuous basis but rather connected
every time the printer starts printing, some time may be needed for the printer to actually start
printing after the host computer commands printing. This pause is the time required for
processing the connection between the host computer and the printer, and it depends on the
conditions of the environment where used.
• If data transfer from an application of the host computer has already been completed, data might
remain in the Bluetooth module internal buffer. Since data remaining in the buffer may be
discarded when the connection is disconnected, when disconnecting the wireless connection
immediately after printing, use status or other means to confirm that the transmitted data has
been printed reliably.
• For detailed information about EPSON TM Bluetooth Connector, see the TM Bluetooth Connector
User’s Manual.
• The device name is editable with the TM-m30III Utility or Epson TM Utility.
• The Bluetooth security level has been set to "Middle" by default. For information on the Bluetooth
security settings, see
"Interface Setup Mode" on page 83.
To Next Page
Loading...
Need help?
General
