29
Chapter 1 Product Overview
About SimpleAP (Wi-Fi Direct)
• The printer acts as an access point in the SimpleAP mode and allows up to eight devices to connect to the
printer. However, devices directly connected to the printer cannot communicate with each other through the
printer.
• The printer can be connected to SimpleAP and a wireless LAN or a wired LAN at the same time. However, if
the printer is already connected to a wireless LAN and setting using the SimpleAP mode is started, the
wireless LAN connection is temporarily disconnected.
• Do not use 172.16.x.x for the IP address of the wireless LAN and wired LAN because the default IP address of
SimpleAP is 172.16.10.1. If used, SimpleAP will be stopped to avoid IP address conflicts.
If SimpleAP is restarted in the above state, the initial IP address of SimpleAP will be changed to
192.168.223.1 to avoid IP address conflicts.
• Even if you have not changed your passphrase, you may be prompted to enter your passphrase. In that case,
enter the serial number of the printer.
To Next Page
Loading...
Need help?
General
