Epson TM-m30III User Manual

42
Chapter 2 Setup
Changing the Paper Width
You can change the paper width from 80 to 58 mm by installing the included 58 mm width roll paper guides.
Follow the steps below to change the paper width.
1
Make sure the printer is turned off.
2
Open the roll paper cover.
3
Install the roll paper guides aligning the triangle marks as shown below.
4
Set the paper width in software setting mode.
For information about the software setting mode, see "Software Settings" on page 65.
Once you change the paper width to 58 mm and print on 58 mm width roll paper, you cannot go
back to 80 mm width. Because parts of the print head that do not normally touch the paper may be
damaged by the platen roller, and the autocutter may wear out.

Epson TM-m30III Specifications

General

Type	POS printer
Print technology	Thermal
Maximum resolution	203 x 203 DPI
USB port	Yes
Serial interface	-
Connectivity technology	Wired & Wireless
Ethernet LAN	No
Internal memory	- MB
Product color	White
Mobile operating systems supported	Android, iOS