Fuji Xerox DocumentCentre C400 Series User Manual

5.6 Network Settings
164
5
System Administration Mode Settings
5.6.2 Protocol Settings
Protocol Settings is a feature for setting the various conditions required for com-
munications.
Protocol Settings allows you to set the following items:
Display of the Current Settings for TCP/IP - IP Address, TCP/IP - Subnet Mask, and TCP/IP - Gateway Address
differs according to the network environment you are using.
Ethernet Board Setting
Set the baud rate and connector type on the Ethernet interface.
(Default is Auto(10BASE-T/100BASE-TX).)
Auto(10BASE-T/100BASE-TX)
100BASE-TX or 10BASE-T is automatically selected.
100BASE-TX
Select this when fixing Ethernet to 100BASE-TX for use.
10BASE-T
Select this when fixing Ethernet to 10BASE-T for use.
When the token ring is implemented, the following items will be displayed.
1. Token Ring - Transmit Rate
Set the transmission rate for the token ring.
(Default is 4 as Auto.)
2. Token Ring - Max Packet Size
Set the maximum packet size for the token ring.
(Default is 1500 as 1500Bytes.)
3. Token Ring - Source Routing
Set the source routing for the token ring.
(Default is 0 as Off.)
●
1. Ethernet Board Setting
●
4. TCP/IP - Subnet Mask
●
2. TCP/IP - Get IP Address
●
5. TCP/IP - Gateway Address
●
3. TCP/IP - IP Address
●
6. TCP/IP - IP Add. for Download
●
7. TCP/IP - IP Filter

Fuji Xerox DocumentCentre C400 Series Specifications

General

Brand	Fuji Xerox
Model	DocumentCentre C400 Series
Category	Copier
Language	English