2.1 Loading Paper
29
Loading Paper
2
3
Push the tray in gently until it comes to
a stop.
Copying or printing is automatically resumed when paper
is loaded correctly.
About Types of Paper Loaded in Trays 1 to 4
Plain paper, recycled paper and bond paper of G.S.M/ 64 to 105 g/m
2
can be
loaded in trays 1 to 4. The machine automatically detects the size and orientation
of loaded paper. The paper type, however, must be set. Normally, plain paper is
set to each of the trays. When loading recycled paper or bond paper in trays,
change the paper type setting. Plain paper, recycled paper and bond paper can
also be named, and set as user-defined paper. Up to five paper types can be set
as user-defined paper.
For details about changing the paper type in trays, see “ Paper Type” (P. 128) in “5.4.4 Setting
Paper Tray Attributes”.
Auto Tray Switching
If you set Paper Source on the Paper/Output tab to Auto in the PCL6 printer
driver’s Properties screen when making prints, the machine automatically selects
the corresponding paper tray according to the size and orientation of the docu-
ment to print. This is called Automatic Tray Selection. When making copies,
automatic tray selection is active if Auto is selected for both the paper type and
ratio selection. If the machine judges that there are two or more corresponding
trays in automatic tray selection, the machine gives higher priority to the tray
having the highest Paper Type Priority set at Tray Paper Type. During automatic
tray selection, trays whose Paper Type Selection setting is set to Off are not tar-
geted in Automatic Tray Selection. Also, if the Paper Priority setting is exactly the
same, automatic tray selection is determined by Tray Priority.
To Next Page
Loading...
Need help?
General
